* * * IMPACT ENTERPRISES HOME & INDEX * * *
* * *
EMAIL: IMPACT@IMPACT-ENTERPRISES.COM * * *CODE 3.3. FOR SHIPPING CONTAINERS AND TRAILERS PLEASE GO TO 20.18:
3.3.12. 30 GALLON POLY-PROPYLENE DRUMS; 10 OR MORE $8. EACH; 1 TO 9 $14. EACH; PHOTO(20K), LOUISIANA; DW-VW
3.3.33. PLASTIC BARRELS FROM FOOD PRODUCTS (WAS LIQUID DRINK CONCENTRATE), CAN BE EASILY USED FOR DRINKING WATER OR FOOD STORAGE THOUGH SHOULD STILL BE CLEANED MORE; 55 GALLON; BLUE COLOR; HAVE TWO 2 INCH NPT (NATIONAL PIPE THREAD) BUNGS (PLUGS) THAT HAVE RUBBER GASKET SEAL WITH 0.75 INCH NPT THREAD KNOCK OUTS IN THE CENTER FOR TAPING VALVES (ONE OPEN ON MOST DRUMS, THERE ARE 3/4 INCH PLASTIC PLUGS THAT FIT THESE); DIMENSIONS: 55 GALLON, 23.5 INCHES IN DIAMETER BY 34.5 INCHES HIGH; DIMENSIONS: 60 GALLON (+$2. MORE EACH), 23.5 INCHES IN DIAMETER BY 36 INCHES HIGH; PHOTO A(40K); PHOTO B(40K); PHOTO C(40K); PHOTO D(40K);
2010812 UPDATE; THE LIQUID DRINK BARRELS ARE ALL SOLD ALREADY; HAVE ABOUT 30 OF 4 DIFFERENT COLORS AND STYLES THAT JUST CAME IN; WERE UNUSED BUT NOT AS CLEAN AS THE OTHER BARRELS WERE AND WOULD NEED RINSING FOR POTABLE USE;
UPDATED INVENTORY AND PHOTOS 2008 05 09: BLACK WITH GRAY BANDS TOP AND BOTTOM (ABOUT 18 PLUGS MISSING); PHOTO L(40K); PHOTO M(40K); HAVE 26 EACH; BLACK WITH BLACK BAND ON TOP, PHOTO N(40K); HAVE 0, NO LONGER AVAILABLE; BLACK WITH INDENT AT TOP; PHOTO O(40K); PHOTO P(40K); HAVE 9 EACH; BLUE WITH BLACK BAND ON TOP: PHOTO Q(40K); HAVE 2; BLUE WITH BLUE BAND ON TOP; PHOTO R(40K); HAVE 2 EACH 1 WITH DAMAGED TOP; BLUE WITH RAISED TOP AND BOTTOM BANDS; PHOTO S(40K); HAVE 2 EACH 1 WITH CRACKING TOP; BLUE WITH BLUE INDENT; PHOTO T(40K); HAVE 5 EACH; BLUE SMOOTH SIDES; PHOTO U(40K); CUT IN HALF WITH BOTTOM HOLES; BLACK WITH GRAY BANDS PHOTO V(40K); HAVE 12 HALVES; AND 3 BLUE HALVES; PRICE FOR FULL DRUMS OR CUT IN HALF'S: 10 OR MORE, $15. EACH; 5 TO 9, $17.00; 1 TO 4, $19. EACH;
RED WITH POP ON TOP ABOUT 40 GALLON; HAVE 1;
ALSO HAVE SOME 6 GALLON ROUND CONTAINERS, INTEGRAL TOP, WITH POUR OPENING AND SCREW OFF SMALL CAP VENT, FROM FOOD PRODUCTS; BLUE COLOR; 11.5 INCHES IN DIAMETER BY 18 INCHES HIGH; TOP CASTING MARKINGS: UN ("U" OVER "N" IN A CIRCLE ABOUT 0.5 INCHES IN DIAMETER; 1H1/Y1.5, 100/002/USA, +AAO729/1.1MM; BOTTOM CASTING MARKINGS: NAMPAC-PA, HDPE 2 (2 IN CENTER OF A RECYCLE TRIANGLE), 6 GALLON, M4202, 0205 (DATE STAMP); WEIGHT ABOUT 4.5* LBS; 10 OR MORE $4.50 EACH; 5 TO 9 $5.00 EACH; 1 TO 4, $6.50 EACH; PHOTO G(40K); PHOTO H(40K); PHOTO I(40K); 20071213 UPDATE; HAVE ONLY A COUPLE LEFT;
ALSO HAVE SOME 5 GALLON RECTANGULAR CONTAINERS, INTEGRAL TOP, WITH POUR OPENING, FROM FOOD SERVICE TYPE EMULSIFYING SOAP; WHITE COLOR; 9.5 INCHES WIDE BY 11.5 INCHES DEEP BY 15.5 INCHES HIGH; TOP CASTING MARKINGS: UN ("U" OVER "N" IN A CIRCLE ABOUT 0.5 INCHES IN DIAMETER; 3H1/Y1.8/100/02/, USA /+AA0712, 1.1MM, 1032; BOTTOM CASTING MARKINGS: NAMPAC-PA, HDPE 2 (2 IN CENTER OF A RECYCLE TRIANGLE), GALLON 5, M4200, 0210 (DATE STAMP); WEIGHT ABOUT 3 LBS ; 10 OR MORE $3.50 EACH; 5 TO 9 $4.00 EACH; 1 TO 4, $5.50 EACH; THIS PLASTIC IS HDPE (HIGH DENSITY POLY ETHYLENE; ALL WERE SHIPPED BY TRUCK BUT THERE ARE NO DOT MARKINGS; LOUISIANA AND MISSISSIPPI; CH-BM-VW-NVNRLO 20071213 UPDATE; HAVE ONLY A COUPLE LEFT;
PLASTIC BARRELS SAME AS ABOVE EXCEPT 60 GALLON SIZE, SLIGHTLY TALLER; 10 OR MORE, $18. EACH; 5 TO 9, $20.00; 1 TO 4, $22. EACH; PHOTO D(40K); PHOTO B(40K); 20071213 UPDATE; HAVE ONLY A COUPLE LEFT;
NOTE: IT IS NOT PRACTICAL TO SHIP BARRELS AND BUCKETS LONG DISTANCES. PICK THEM UP OR WE CAN DELIVER FOR A FEE UP TO ABOUT 75 MILE RADIUS OF SLIDELL LOUISIANA/ PEARLINGTON, MISSISSIPPI AREA;
3.3.36. STEEL PAINT VATS; CAN USED FOR OTHER THINGS; $* PRICE NEGOTIABLE; PHOTO(40K); PHOTOA(40K); PHOTOC(40K); LOUISIANA; FR-LA-VW-IINOV
3.3.41. FUEL DISPENSING NOZZLE; 1.5 INCH; MILVACO BRAND; NUMBER P-2050, SN 351*30 H; MADE OF BRASS AND CAST ALUMINUM*; HAS SNUG FITTING DUST CAP ON DISPENSING END; HAS MOVABLE RUBBER COVERED RING TO CONTROL INSERTION DEPTH INTO TANK AND PREVENT MARING OF AREA AROUND FUEL FILLER; HAS GROUNDING CABLE, CLAMP AND PLUGIN PIN; NEW UNUSED CONDITION; WEIGHT 10 LBS, ADD 4 LBS FOR PACKAGING; DIMENSIONS: 19 INCHES BY 11 INCHES WIDE BY 6.5 INCHES HIGH; ADD 2 INCHES TO EACH DIMENSION FOR PACKAGING; $200.; PHOTO(40K); LOUISIANA; RS-VW-IILOLV (ALSO 16.2.76.)
3.3.42. FUEL TANK ON SKIDS; 150 GALLONS; $195.; PHOTOA(40K); PHOTOB(40K); LOUISIANA; MS-VW-NNNALV
3.3.43. STAINLESS STEEL DRUMS; 30 GALLON; CAN BE CLOSED HEAD OR OPEN HEAD WITH RE-USABLE BAND SEAL; $400. AND UP; CLOSED HEAD DRUM SHOWN PHOTOA(40K); U.S.A.; JL-MB-VW-NNNTVN
3.3.44. FREELOAD-R ROLLING TARP SYSTEM ALLOWS ANY TRAILER FROM SNOW MOBILE TRAILERS TO DUAL DROP DECK TRAILERS AND ANYTHING IN BETWEEN TO BE CONVERTED INTO A VAN STYLE UNIT AND BACK TO A FLATBED IN MINUTES. CUSTOMIZED TO ANY LENGTH, WIDTH OR HEIGHT, THE SYSTEM WORKS BY ROLLING THE FABRIC TARP ON A TRACK THAT IS ATTACHED TO THE SIDE OF THE TRAILER, HENCE THE NAME "ROLLING TARP SYSTEM"; THE CONVERSION PROCESS TAKES AS LITTLE AS TWO MINUTES TO PERFORM, START TO FINISH, AS OPPOSED TO THE SEVERAL HOURS IT WOULD TAKE A DRIVER TO COVER A LOAD USING STANDARD TARPING METHODS; PHOTOA(40K); PHOTOB(40K); PHOTOC(40K);
LET THE SUNSHINE IN; PHOTOD(40K); THE SYSTEM COMES WITH FULL LENGTH WHITE ROOF PANELS AS STANDARD FEATURE; PHOTOE(40K); THE TARP IS MADE OF HIGH TENACITY FABRIC AND PRE-MANUFACTURED AT OUR MODERN IN-HOUSE WELDING FACILITIES; ALL TARPS ARE 22 OZ. STANDARD; PHOTOF(40K); $*; CANADA; BR-VW-NNNNINI (SEE ALSO 20.3.251.)
3.3.45. BULKTRAIL-R; CONVERTS FROM A BULK TANKER INTO A FLATBED TRAILER IN LESS THAN TWO MINUTES; NO MORE DEADHEADING!; THE CHAMELEON BULKTRAIL-R IS A REVOLUTIONARY PNEUMATIC BULK TANKER WHICH AT THE TOUCH OF A BUTTON CONVERTS TO A FLATBED TRAILER (OR VICE VERSA); THE BULKTRAIL-R ALLOWS YOU TO HAUL A WIDE VARIETY OF BULK MATERIALS ONE WAY AND CARRY FREIGHT IN THE FLATBED MODE ON THE RETURN TRIP; HAS MANY OTHER ADVANTAGES; WITH OPTIONAL LINERS IT CAN HAUL DISSIMILAR PRODUCTS EACH WAY WITHOUT WASHOUTS OR CONTAMINATION; CAN CARRY ALMOST ANYTHING; SUCH AS FLOUR, SUGAR, CEMENT, PLASTIC, RESINS, MOST INDUSTRIAL AND AGRICULTURAL CHEMICALS; PETROCHEMICALS AND SEVERAL PRODUCTS THAT ARE PRESENTLY MOVED IN STAINLESS STEEL OR OTHER SPECIALIZED COATED TANKERS; PHOTOA(40K); PHOTOB(40K); ADD OUR OPTIONAL ROLLING TARPING SYSTEM; IT WILL LOAD LIKE A FLATBED, PROTECT YOUR CARGO LIKE A VAN; PHOTOC(40K); $*; CANADA; BR-VW-NNNNINI (SEE ALSO 20.3. 252.)
3.3.46. LIQUITAIN-R'S CONTAINER; 23,000 LITER; $*; PHOTO(6K); CANADA; BR-VW-NNNILN
3.3.47. LIQUITAIN-R'S CONTAINER; 26,000 LITER;$*; PHOTO(9K); CANADA; BR-VW-NNNILN
3.3.48. LIQUITAIN-R'S CONTAINER; 7,000 LITER; $*; PHOTO(8K); CANADA; BR-VW-NNNILN
3.3.49. LIQUITAIN-R'S CONTAINER; 4,000 LITER; $*; PHOTO(7K); CANADA; BR-VW-NNNILN
3.3.51. PRODUCTION MINI-PLANTS IN MOBILE CONTAINERS; "...SCIENCE NETWORK WILL SUPPLY TO COUNTRIES AND DEVELOPING REGIONS THE TECHNOLOGY AND THE NECESSARY SUPPORT FOR THE PRODUCTION IN SERIES OF MINI-PLANTS IN MOBILE CONTAINERS (40 FOOT). THE MINI-PLANT SYSTEM IS DESIGNED IN SUCH A WAY THAT ALL THE PRODUCTION MACHINERY IS FIXED ON THE PLATFORM OF THE CONTAINER, WITH ALL WIRING, PIPING, AND INSTALLATION PARTS; THAT IS TO SAY, THEY ARE FULLY EQUIPPED... AND THE MINI-PLANT IS READY FOR PRODUCTION."
MORE THAN 700 PORTABLE PRODUCTION SYSTEMS: BAKERIES, STEEL NAILS, WELDING ELECTRODES, TIRE RETREADING, REINFORCEMENT BAR BENDING FOR CONSTRUCTION FRAMEWORK, SHEETING FOR ROOFING, CEILINGS AND FACADES, PLATED DRUMS, ALUMINUM BUCKETS, INJECTED POLYPROPYLENE HOUSEWARES, PRESSED MELAMINE ITEMS (GLASSES, CUPS, PLATES, MUGS, ETC.) MUFFLERS, CONSTRUCTION ELECTRICALLY WELDED MESH; PLASTIC BAGS AND PACKAGING, MOBILE UNITS OF MEDICAL ASSISTANCE, SANITARY MATERIAL, HYPODERMIC SYRINGES, HEMOSTATIC CLAMPS, ETC; $*; SL-FN-VW-NLNTOI
3.3.52. GLASS-LINED STEEL EQUIPMENT FOR THE CHEMICAL AND PHARMACEUTICAL INDUSTRIES: 50-50, OOOL GLASS-LINED/STAINLESS/TITANIUM STEEL REACTORS; STORAGE VESSELS; DISTILLATION VESSELS; HEAT EXCHANGERS; FILTERS; ACCESSORIES: AGITATORS; REDUCERS; CENTRIFUGES; VACUUM PUMPS; FLUSH VALVES; ELECTRICAL-HEATING BARS AND MECHANICAL SEALS; MANUFACTURER IN A POSITION TO CUSTOM DESIGN AND MANUFACTURE ACCORDING TO YOUR SPECIFIC REQUIREMENTS; $*; CHINA; GH-ZT-VW-NLLNNI
3.3.53. PRESSURE VESSELS; FOR PETROCHEMICAL, ENERGY, METALLURGICAL, CURATORIAL, REFRIGERATION, MACHINERY, AIR CONDITIONING AND OTHER INDUSTRIES.
HEAT EXCHANGERS, TANKS, SEPARATORS, TOWERS AND REACTORS ARE INCLUDED IN PRESSURE VESSELS AND MATERIALS OF CARBON STEEL, CHROME-MOLYBDENUM STEEL, STAINLESS STEEL, ALUMINUM, COPPER AND NICKEL ALLOY, DUPLEX STAINLESS STEEL, AND TITANIUM ARE USED.
THE TUBE-SHELL AND FIN-TUBE COOLERS ARE OUR HIGHEST VOLUME PRODUCTS. OUR PRODUCTS HAVE BEEN USED IN FLUID POWER SYSTEMS, INJECTION MOLDING MACHINES, PAPER MACHINERY, MOBILE EQUIPMENT, HYDRAULIC PRESSES, GEAR DRIVES, TORQUE CONVERTERS, MACHINE TOOLS, COMPRESSORS AND OTHERS;
WE CAN PROVIDE STATIC AND DYNAMICS CALCULATION BY COMPUTER BASED SIMULATION OF WHAT YOU NEED; THE STANDARD PRODUCTS PROVIDED TO DATE HAVE BEEN IN THE PRESSURE RANGE OF 0.1 MPA TO 10 MPA AND THE AREAS HAVE BEEN 0.2 SQ METERS TO 40 SQ METERS. WE CAN ALSO E CUSTOM BUILD TO MEET YOUR SPECIFICATION 40; EXCEPTIONALLY FAST MANUFACTURE FROM YOUR DRAWINGS; PRODUCTS DESIGNED AND MANUFACTURED IN ACCORDANCE WITH ASME, TEME, ISO 9000 AND CUSTOM SPECIFICATIONS; $*; CHINA; LW-VW-NLLOLE
3.3.62. STEEL FUEL TANK; 8,000 GALLONS TOTAL VOLUME, 6,400 WITH ROOM FOR EXPANSION (REDUCE BY 10%); WITH ELECTRIC FUEL PUMP, 50* FOOT FUEL HOSE AND FUEL DISPENSING SHUTOFF VALVE; ROUND PROFILE; ON FULL LENGTH WIDE SKIDS; COULD USE PAINT JOB BUT GOOD METAL; TANK DIMENSIONS 21.3 FEET LONG BY 8 FEET WIDE (377 GALLONS PER FOOT OF LENGTH) BY 9* FEET HIGH (OVER ALL LENGTH IS 26.5* FEET LONG WITH PLATFORM AND PUMP IN FRONT AND LADDER ON BACK); 20 INCH INSPECTION COVER, 3* INCH FILL PIPE AND 1.5 INCH VENT PIPE ON TOP; COULD USE A PAINT JOB, COATINGS IN ABOUT 50% CONDITION, STEEL IN ABOUT 85% CONDITION; $5,500.; WITHOUT THE PUMP AND HOSE, $4,500.; PHOTO A(200K); PHOTO D(200K); PHOTO C(200K); PHOTO D(200K); LOUISIANA; JC-VW-LMNLLO
FOR SHIPPING CONTAINERS AND TRAILERS PLEASE GO TO 20.18:
WHEN MAKING INQUIRIES PLEASE INCLUDE THE ITEM NUMBER AND AS MUCH DETAIL ABOUT WHAT YOU WANT AS POSSIBLE. YOU SHOULD ALSO INCLUDE YOUR PHONE NUMBER, LOCATION AND GMT TIME. WE CAN OFTEN CLARIFY MUCH DETAIL FASTER ON THE PHONE. WE CAN OFTEN GIVE YOU AN ESTIMATE OF AVERAGE SHIPPING IF YOU WILL INCLUDE AT LEAST CITY AND ZIP CODE IN THE U.S. OR FOREIGN MAIL CODE. WE ARE IN GMT -0600 AND CAN BE REACHED BEST BETWEEN 0700 AND 2300 -0600 GMT (GREENWICH MEAN TIME).
FOR ALL ITEMS OR PARTS THAT YOU WANT THAT ARE NOT ON THE WEBSITE INCLUDE PHOTOS. HERE IS SOMETHING WE HAVE LEARNED THAT WILL SAVE ALL OF US TIME. IN THIS DAY AND AGE PHOTO INFORMATION IS ABOUT 10 TIMES AS POWERFUL AS TEXT AND ABOUT 5 TIMES AS POWERFUL AS VOICE COMMUNICATION. PHOTOS ARE INTERNATIONAL LANGUAGE. SEND PHOTOS IF AT ALL POSSIBLE. IF YOU CANNOT FIND THE NUMBERS SEND PHOTOS AND A TEXT DESCRIPTION WITH DIMENSIONS THE BEST THAT YOU CAN. WE HAVE HAD THE EXPERIENCE ON SOME MACHINES THAT DATA PLATES, IDENTITY TAGS AND NUMBERS ARE LOST OR CANNOT BE READ. WHEN YOU SEND PHOTOS WE CAN EMAIL THEM TO OUR NETWORK AND MANY MORE PEOPLE TAKE AN INTEREST AND FIND IT MUCH EASIER TO UNDERSTAND AND FORWARD TO OTHERS IN ATTEMPTS TO FIND PARTS FOR YOU. SEND PHOTOS FOR REASONABLE LOCATION AND ESTIMATES.
AN ASTERISK (ALSO KNOWN AS "STAR") " * " MEANS THAT WE SEE THAT THERE IS IMPORTANT AND HELPFUL DETAIL MISSING OR THE ACCURACY IS IN QUESTION. IN MOST CASES WE ARE TRYING TO CLARIFY AND CONFIRM OBJECTIVE DETAILS AND WILL UPDATE AS WE GET MORE INFORMATION.
* * * IMPACT ENTERPRISES HOME & INDEX * * *
* * * EMAIL: IMPACT@IMPACT-ENTERPRISES.COM * * *
WE HAVE CHECKED, PERSONALLY USE AND RECOMMEND THE PRODUCTS IN THESE LINKS.
TO REDUCE MISTAKES ALL PRICES ON THIS WEB SITE ARE IN U.S. DOLLARS.
USEFUL TANK CAPACITY INFORMATION
VOLUMES OF ROUND TANKS:
FORMULA: DIAMETER SQUARED TIMES .7854 TIMES 1 FOOT TIMES 7.5 = GALLONS PER FOOT OF LENGTH; (A CUBIC FOOT = 7.5 GALLONS)
1 FOOT DIAMETER IS 5.89 GALLONS PER FOOT OF LENGTH
2 FOOT DIAMETER IS 23.56 GALLONS PER FOOT OF LENGTH
3 FOOT DIAMETER IS 53.01 GALLONS PER FOOT OF LENGTH
4 FOOT DIAMETER IS 94.24 GALLONS PER FOOT OF LENGTH
5 FOOT DIAMETER IS 147.26 GALLONS PER FOOT OF LENGTH
6 FOOT DIAMETER IS 212.05 GALLONS PER FOOT OF LENGTH
7 FOOT DIAMETER IS 288.63 GALLONS PER FOOT OF LENGTH
8 FOOT DIAMETER IS 377.99 GALLONS PER FOOT OF LENGTH
9 FOOT DIAMETER IS 477.13 GALLONS PER FOOT OF LENGTH
10 FOOT DIAMETER IS 589.05 GALLONS PER FOOT OF LENGTH
COMPLETE DETAILS ARE
REQUIRED FOR PARTS SEARCH AND THE REASONS ARE:
1
WE NEED THE TYPE OF MACHINE, BRAND NAME, MODEL NUMBER, SERIES NUMBERS, SPEC
NUMBERS (ALSO KNOWN AS PRODUCTION NUMBER IN SOME BRANDS), SERIAL NUMBERS AND
DESCRIPTION TO GET THE AVAILABILITY AND PRICES OF ANY PART OF ANY ITEM NEW AND
USED. THE MODEL NUMBER, SERIAL NUMBER, SPEC. OR PRODUCTION NUMBER
FOR BOTH THE ITEM AND ALL THE NUMBERS OF THE ITEM, MACHINE OR APPLIANCE IT IS
USED IN. THE REASON THIS IS NECESSARY IS BECAUSE OEM'S (ORIGINAL
EQUIPMENT MANUFACTURES) ARE
REMOVING THE MANUFACTURE'S DATA PLATE AND
ARE PUTTING THERE OWN STOCKING NUMBERS ON PARTS SO THAT OWNERS WANTING REPAIR
PARTS HAVE TO COME BACK TO THE MANUFACTURES SYSTEM TO GET THEM.
NUMBERS ARE CHANGED BY MANY COMPANIES AND
MANY COMPANIES ARE BOUGHT OUT BY OTHER COMPANIES AND THE NUMBERS ON ITEMS NOT
DELETED ARE MERGED INTO THE BIGGER SYSTEM.
THIS HELPS SUPPORT THE DEALER SYSTEM AND THE PARTS STOCKING SYSTEM.
THE PEOPLE IN THE WAREHOUSES CANNOT FIND THINGS WITHOUT HAVING ALL THE NUMBERS AND GENERALLY THE WAREHOUSE PEOPLE OF TODAY HAVE VERY LITTLE MECHANICAL APTITUDE AND/OR ACTUAL EXPERIENCE SO THEY HAVE LITTLE IDEA WHAT MOST PARTS DO. SEVERAL FACTORS THAT HAVE BEEN DEVELOPING IN THE PAST DECADE ARE SHOWING THE FUTURE. THERE IS INCREASINGLY RAPID INNOVATION AND IMPROVEMENT AND WORLD WIDE COMPETITION. SOME PEOPLE CALL THIS PLANNED OBSOLESCENCE BUT THIS IS DIFFERENT. EVEN THE FAMOUS VW BEATLE HAD DIFFERENT IMPROVED OR RESHAPED PARTS IN PROGRESSIVELY NEWER MODELS. THERE ARE DIFFERENCES IN THE SAME MODELS IN THE SAME YEAR. THIS IS WHY THE SERIAL NUMBER IS OFTEN NECESSARY TO GET A REPLACEMENT PART. IT SAVES US ALL TIME AND MONEY IF WE GET ALL THE NUMBERS AND PHOTOS RIGHT FROM THE START. SEND PHOTOS FOR REASONABLE LOCATION AND ESTIMATES.
2
IT IS GETTING HARDER TO GET PARTS FOR OLD MACHINERY AND ITEMS OF ALL TYPES OLDER
THAN 1980 EVEN FOR ONE OF THE BEST KNOWN BRANDS WORLD WIDE, THE CATERPILLAR
BRAND. WE HAVE SEEN THIS TREND MOVING TO ONLY 10 YEARS AND LESS PARTS
AVAILABILITY OVER THE NEXT DECADE. THE FUTURE WILL BE "THROW
AWAY" OR "RECYCLE" OR JUST IN TIME PARTS EVEN IN THE FIRST 10
YEARS AFTER MANUFACTURE. WE ARE SEEING AUTOMATED MASS PRODUCTION
CHEAPER THAN REPAIR LABOR AND SPARE PARTS WAREHOUSING COSTS FOR BIGGER
MACHINERY NOT JUST ELECTRONICS AND SMALLER HARD GOODS.
WE HAVE EVEN TRIED A FEW YARDS THAT HAD MANY OLD MACHINES AND THEY WANTED SO MUCH TO TAKE THE PARTS OFF THAT IT WAS NOT WORTH IT ESPECIALLY SINCE THE SAME PARTS ARE USUALLY BAD AND MOST MACHINES OF THE SAME MODELS AND YEARS.
3 MANY PARTS ARE NO LONGER AVAILABLE. THERE ARE JUST TOO MANY DIFFERENT MODELS AND NO ECONOMICALLY EFFICIENT WAY TO STORE PARTS FOR ALL OF THEM SO THE MANUFACTURE'S WAREHOUSING DEPARTMENTS ARE BEING PROMPTED BY THE COMPUTER PROGRAMS, BASED ON "EFFICIENCY" AND "RETURN ON INVESTMENT" STUDIES, TO CLEAR THE SHELVES OF PARTS THAT HAVE NOT MOVED IN SUFFICIENT QUANTITY OVER A VARYING PERIOD OF YEARS. TO DO THIS THEY GENERALLY HAVE "SCRAPERS" COME IN AND CLEAN UP. THERE WAS A GENERALLY FOLLOWED "LAW" THAT A MANUFACTURER HAD TO HAVE PARTS AND REPAIRS OR EXCHANGE FOR AT LEAST 10 YEARS. THIS IS NOT THE CASE WITH MOST MANUFACTURES AROUND THE WORLD NOW. IN THE U.S. THE STANDARD IS FOR 7 YEARS SUPPORT NOW. MANY ITEMS MADE IN CHINA ARE ONE RUN ONLY AND WILL NEVER BE MADE THE SAME.
THE "SCRAPERS" CANNOT AFFORD TO WAREHOUSE EVEN $3,000. CRANK SHAFTS AND OTHER EXPENSIVE MACHINED PARTS THAT MIGHT NOT MOVE FOR MANY YEARS IF EVER SO THE SCRAPERS SELL THEM FOR SCRAP METAL. THE METAL RECYCLERS ARE IN THE SAME SITUATION. EVEN THE BEST MATERIALS CANNOT SURVIVE IN SALABLE CONDITION WITHOUT PROPER CLIMATE CONTROLLED STORAGE AND A SYSTEM TO FIND THEM AGAIN. SEND PHOTOS FOR REASONABLE LOCATION AND ESTIMATES.
4 THE GLOBAL MARKET IS MOVING RAPIDLY TO A "MAKE AS NEEDED PARTS SYSTEM" USING COMPUTER CONTROLLED EQUIPMENT THE SAME AS ABOUT 50% OF THE ORIGINAL EQUIPMENT IS MANUFACTURED NOW. THIS WILL SAVE AN ESTIMATED 50% MINIMUM ON PARTS COST, MAKE IT POSSIBLE TO HAVE PARTS FOR MORE DIFFERENT MACHINES AND ACTUALLY REDUCE THE TIME TO FIND, AND SHIP PARTS WORLD WIDE.
MICROSOFT, WHOM MOST PEOPLE BELIEVE ARE ON THE LEADING EDGE OF CHANGE, PERIODICALLY STOP PROVIDING TECHNICAL SUPPORT FOR THEIR OLDER PRODUCTS. THE POLICY IS TO PROVIDE A MINIMUM OF 5 YEARS OF SUPPORT FOR BUSINESS OPERATING SYSTEMS. CUSTOMERS CAN BUY "EXTENDED SUPPORT" FOR ANOTHER 2 YEARS. MOST OTHER COMPANIES PRODUCING HARD GOODS HAVE OR WILL DO THE SAME IN THE NEAR FUTURE. THIS IS NOT THE 1950'S. THIS IS NOT EVEN THE 1970'S. WE ARE IN THE 21 ST CENTURY. SEND PHOTOS FOR REASONABLE LOCATION AND ESTIMATES.
5 HERE IS SOMETHING WE HAVE LEARNED THAT WILL SAVE ALL OF US TIME. IN THIS DAY AND AGE PHOTO INFORMATION IS ABOUT 10 TIMES AS POWERFUL AS TEXT AND ABOUT 5 TIMES AS POWERFUL AS VOICE COMMUNICATION. PHOTOS ARE INTERNATIONAL LANGUAGE. SEND PHOTOS IF AT ALL POSSIBLE. IF YOU CANNOT FIND THE NUMBERS SEND PHOTOS AND A TEXT DESCRIPTION WITH DIMENSIONS THE BEST THAT YOU CAN. WE HAVE HAD THE EXPERIENCE ON SOME MACHINES THAT DATA PLATES, IDENTITY TAGS AND NUMBERS ARE LOST OR CANNOT BE READ. WHEN YOU SEND PHOTOS WE CAN EMAIL THEM TO OUR NETWORK AND MANY MORE PEOPLE TAKE AN INTEREST AND FIND IT MUCH EASIER TO UNDERSTAND AND FORWARD TO OTHERS IN ATTEMPTS TO FIND PARTS FOR YOU. SEND PHOTOS FOR REASONABLE LOCATION AND ESTIMATES.
GUIDANCE ON TAKING MORE USEFUL PHOTOS: TRY TO GET A MINIMUM OF 2 PHOTOS. FIRST FROM THE FRONT AND LEFT AND THE SECOND FROM THE REAR AND RIGHT SIDE. THIS GIVES 360 DEGREE COVERAGE. SOME ITEMS IT MIGHT BE NOT POSSIBLE TO GET ALL AROUND. PHOTOS OF THE INTERIOR OF COMPARTMENTS, CABS, MOTORS, MOVING PARTS, WEARING PARTS, IDENTIFICATION PLATES, LOAD CHARTS ARE INTERNATIONAL LANGUAGE. PHOTOS GIVE VERY MUCH INFORMATION AND ARE UNDERSTOOD AND TRUSTED MORE THAN TEXT ALONE. EVEN PEOPLE SPEAKING THE SAME LANGUAGE GREATLY SPEED UP TRUST AND UNDERSTANDING WITH PHOTOS.
6 IN CASE YOU ARE WONDERING THIS IS NOT WORTH DOING FOR ONE OR TWO ORDERS. WE DO THIS TO TRY TO DEVELOP A LONG TERM GOOD WORKING RELATIONSHIP AND TRUST. WE HOPE TO BE ABLE DO OTHER BUSINESS TOGETHER IN THE FUTURE.
7 ALSO SEND SHIPPING INFORMATION INCLUDING ADDRESS WITH ZIP CODES, CONTACT INFORMATION AND PREFERRED METHOD AND CARRIER.
8 MANY MACHINE SHOPS CAN REPAIR OR REMAKE MANY PARTS IF THAT IS ALL THAT IS KEEPING AN OLD MACHINE FROM WORKING. WE HAVE EVEN HAD LOCAL REPRESENTATIVES OF MACHINE TOOL MANUFACTURERS TELL US THAT ON OLD LATHES IT WILL BE CHEAPER AND FASTER FOR THE CUSTOMER TO HAVE THE PART MADE LOCALLY. IT WOULD ALSO TAKE 6 TO 9 MONTHS TO HAVE THE PART MADE BECAUSE OF LEAD TIME AND SHIPPING. ANOTHER SLOW DOWN IS THAT MANUFACTURES WILL MOST OFTEN NOT SHIP DIRECT SO PARTS HAVE TO GO THROUGH THE NEAREST DISTRIBUTOR THEN THEY CAN BE EXPORT SHIPPED. SEND PHOTOS FOR REASONABLE LOCATION AND ESTIMATES.
9 YOU ARE CORRECT. PHOTOS ARE NECESSARY. SEND PHOTOS. WITHOUT PHOTOS WE BOTH WASTE TIME. YOU DO NOT BELIEVE HOW HARD AND TIME WASTING IT IS TO GET EVEN NEW PARTS WITHOUT PHOTOS.
10 IF YOU FIND ANY SOURCES WOULD YOU PLEASE LET US KNOW AND WE WILL MARKET COPIES OF MANUALS AND SURPLUS AND SALVAGE PARTS WITH YOU.
LIMITED WARRANTIES AND GUARANTIES: ALL ITEMS ARE SOLD AS IS WHERE IS. IT IS NOT PRACTICAL TO SHIP MOST ITEMS ESPECIALLY MACHINERY ITEMS GREAT DISTANCES EVEN BETWEEN STATES AND ESPECIALLY BETWEEN COUNTRIES BUT THESE STATEMENTS SHOW THAT THE ITEMS ARE BETTER QUALITY AND WILL PROBABLY BE REASONABLY TROUBLE FREE WHEN PROPERLY MAINTAINED.
EVEN IF WE BUY A CAR IN THE U.S. IT HAS TO BE DELIVERED BACK TO THE DEALER OR AN AUTHORIZED SERVICE PROVIDER WHERE A DETERMINATION CAN BE MADE THAT A PROBLEM IS DUE TO A DEFECT IN MATERIALS OR WORKMANSHIP AND IS NOT DUE TO LACK OF PROPER OPERATION AND MAINTENANCE OR NORMAL WEAR AND TEAR. ITEMS USED FOR COMMERCIAL BUSINESS ARE OFTEN NOT WARRANTED TO THE SAME STANDARD. A VERY FEW ITEMS HAVE A NATIONAL AUTHORIZED SERVICE NETWORK THAT IS PRACTICAL WHEN WE CONSIDER OUR "DOWN TIME" AND EVEN FEWER HAVE INTERNATIONAL NETWORKS. OUR BEST GUARANTEE IS TO PROPERLY OPERATE AND MAINTAIN WHAT WE BUY AND IT WILL BE CHEAPER OVER TIME AND IN MOST CASES MUCH OF OUR PROFIT MARGIN.
MOTIVATED RESPONSIBLE PERSONS ARE REQUIRED TO MAINTAIN EVERYTHING EVEN PERSONAL RELATIONSHIPS. THIS IS EVEN MORE IMPORTANT IN DEVELOPING COUNTRIES BECAUSE SPARE PARTS AND EXPERIENCED SERVICE ARE NOT AS AVAILABLE. MOST AMERICAN BUSINESSES BUY USED EQUIPMENT WHENEVER THEY CAN AND MAINTAIN IT THEMSELVES ESPECIALLY WHEN THEY ARE GROWING. THE NEW EQUIPMENT IS OFTEN TOO EXPENSIVE AND STILL HAS TO BE OPERATED AND MAINTAINED PROPERLY FROM THE FIRST DAY OR THE DOWN TIME PUTS US OUT OF PROFITABLE BUSINESS. IF WE DO NOT HAVE TIME TO "DO IT RIGHT" WHEN WILL WE FIND TIME "TO DO IT OVER".
NO LONGER AVAILABLE; LEFT FOR REFERENCE;
3.3.3. 50,000 GALLON COLLAPSIBLE TANKS, NEW SURPLUS; WERE MANUFACTURED ABOUT 1979 (LABEL ON EACH TANK WITH DATE) AT A COST OF $10,000. EACH; CURRENT NEW COST IS $15,000. AND 6 TO 8 WEEKS DELIVERY TIME FROM THE FACTORY; 25 FEET (7.62 M) WIDE, 65 FEET (19.8 M) LONG, 5.7 FEET (1.74 M) HIGH WHEN FILLED; WATER, FUEL, CHEMICALS OR AIR ( MAKE A SUPER FLOAT); HAVE TWO 4 INCH (10.16 CM) QUICK CONNECT MALE FITTINGS WITH CAPS AND ONE 1 1/2 INCH (3.81 CM) VENT ON TOP; CAN ALSO BE USED AS TENT OR TARP MATERIAL THAT DOES NOT ROT; THEY WEIGH ABOUT 1,000 POUNDS (453.6 KG) WITHOUT PACKING AND HOSE KITS; ONE WOULD FILL THE BED OF A FULL SIZE PICK-UP TRUCK IN THE ROLLED-UP CONDITION; SHIPPING WEIGHT ON PALLET, CRATE AND WRAPPING IS 1,600 POUNDS (726 KG); THE FEW GOOD ONES ARE SOLD ALREADY; PHOTO(38K); PHOTO(62K); NO LONGER AVAILABLE; LEFT FOR REFERENCE;
HAVE 3 THAT HAD BEEN USED AND EXPOSED TO WEATHER SEVERAL YEARS THAT ARE NOT RECOMMENDED FOR TEMPORARY FUEL STORAGE NOW (THERE IS DANGER SOME SEAMS COULD COME APART) BUT ARE VERY GOOD AS HEAVY COVERING, TENTING AND GROUND COVERS THAT WILL LAST 5 TO 10 YEARS OR MORE EXPOSED TO WEATHER; THESE WILL LAST LONGER AS POND, POOL OR PIT LINERS BECAUSE THEY WOULD NOT HAVE THE SUN DAMAGE; SPLIT OPEN THEY ARE 50 FEET (15.24 M) BY 65 FEET (19.8 M) OR 3,250 SQUARE FEET (301.9 M2); $450. EACH FOR THESE; HOSE KITS WITH 9 FEET 2.74 M) OF FUEL RESISTANT 4 INCH (10.16 CM) WITH ANODIZED ALUMINUM GATE VALVE AND QUICK DISCONNECT FITTINGS; THERE IS ALSO A BRASS 90 DEGREE SHORT BEND QUICK DISCONNECT FITTING AND A 1.5 INCH (3.81 CM) TOP VENT PIPE AND CHECK VALVE WITH QUICK DISCONNECT FITTING; $225. EACH OR $200. EACH TWO OR MORE; FOLSOM, LA. RS-VW UPDATED 20040905 NEW PRICE IS $23,000.; PRICE ON THE 3 USED RAISE FROM $250. EACH TO $450. EACH; NO LONGER AVAILABLE; LEFT FOR REFERENCE;
3.3.4. STEEL TANK, 300 GALLONS, 10 GAGE; PAINTED WHITE; APPROXIMATELY 4 FOOT IN DIAMETER AND 7 FEET LONG, TO MAKE SMOKER OR BARBECUE; ON SKIDS; GAS FREE; USED FOR WATER TANK; CAN BE CUT AND WORKED; $75.00. ; LOUISIANA; VW NO LONGER AVAILABLE; LEFT FOR REFERENCE;
3.3.5. STEEL TANK; 250 GALLON PROPANE TANK; 1/4 INCH STEEL; GAS FREE; WAS USED AS A STOCK FEEDER; WILL BE VERY GOOD FOR A BIG BARBECUE; WILL TAKE HEAT AND NOT RUST AWAY; 7.67 FEET LONG BY 2.5 FEET IN DIAMETER; HAS ONE OPENING CUT IN TOP AT ONE END 22* INCHES LONG BY 16* INCHES WIDE; WEIGHT ABOUT 600 LBS; $200.; PHOTO A(40K); PHOTO B(40K); LOUISIANA; VW; UPDATED 20030628 NO LONGER AVAILABLE; LEFT FOR REFERENCE;
3.3.9. STEEL FUEL TANKS, SKID MOUNTED, 48 INCH DIAMETER BY 12 FEET LONG, 1120 GALLONS, GRAY COLOR, (1); 48 INCHES BY 6 FEET, 556 GALLONS, GRAY COLOR, (3), YELLOW COLOR (1): 45 INCHES BY 81 INCHES, 557 GALLONS, RED COLOR, MARKED; GAS; (1) $0.60 PER GALLON. PHOTO(43K), LOUISIANA; MH-VW NO LONGER AVAILABLE; LEFT FOR REFERENCE;
3.3.10. FIBERGLASS STORAGE TANKS; 8 FOOT DIAMETER BY 16 FOOT LONG; 6,032 GALLONS (USING THESE DIMENSIONS AS ID); SALVAGED SMALL FUEL TANKS, CLEANED OUT; COST $12, 000. EACH; CAN BE USED FOR OTHER LIQUIDS OR SAWED IN HALF TO MAKE VATS AND TANKS; $4,000. EACH;. PHOTO(28K), LOUISIANA; GG-TM-VW NO LONGER AVAILABLE; LEFT FOR REFERENCE;
3.3.23. AGRICULTURAL FIBERGLASS TANKS: NO LONGER AVAILABLE; LEFT FOR REFERENCE;
PART #
GALLON
DIAM.BY
LBS
POINT PRICE
LENGTH
A1102
25 23 X
18
22
S
$212.
A1282
55 23 X
36
27
S
$250.
A1342
65 23 X
42
29
S
$268.
A1462
85 23 X
54
34
S
$273.
A2222
55 24 X
32
28
S.W.A. $260.
A2272
65 24 X
37
30
S.W.A. $278.
A2382
85 24 X
47
34
S.W.A. $310.
A2512
110 24 X
60
40
S.W.A. $336.
A2623
130 24 X
71
56
S.W.A. $362.
A3332
110 30 X
43
46
S.W.A. $332.
A3472
150 30 X
57
51
S.W.A. $400.
A3633
200 30 X
75
74
S.W.A. $445.
A4362
150 32 X
47
53
S.W.A. $400.
A4513
200 32 X
61
74
S.W.A. $445.
A4663
250 32 X
72
86
S.W.A. $518.
PART#
GALLON
DIAM.BY
LBS
POINT PRICE
LENGTH
A4853
300 32 X
91
100
S.W.A. $583.
A5202
150 30 X
37
68
S.W.A. $414.
A5313
200 38 X
48
73
S.W.A. $483.
A5423
250 38 X
58
82
S.W.A. $544.
A5533
300 38 X
69
105
S.W.A. $636.
A5633
350 38 X
79
116
S.W.A. $730.
A5784
400 38 X
89
147
S.W.A. $806.
A5834
425 38 X
94
156
S
$820.
A6483
350 42 X
66
117
S
$783.
A6563
400 42 X
75
127
S
$900.
A6744
500 42 X
91
170
S $1,143.
A6834
530 42 X
97
181
S $1,189.
A7383
400 48 X
61
150
S.W.A. $900.
A7544
500 48 X
73
186
S.W.A. $1,232.
A7674
600 48 X
86
206
S.W.A. $1,411.
PART#
GALLON
DIAM.BY
LBS
POINT PRICE
LENGTH
A7855
700 48 X
100
266
S.W.A. $1,520.
A7955
800 48 X
112
291
S.W.A. $1,640.
A7625
900 48 X
126
317
S.W.A. $1,646.
A7058
1000 48 X
139
391
S.W.A. $1,960.
A8654
1000 60 X
97
393
S.W.A. $2,065.
A8785
1100 60 X
105
462
S.W.A. $2,667.
A8865
1200 60 X
113
476
S.W.A. $2,860.
A8955
1300 60 X
122
498
S.W.A. $2,975.
A8A35
1400 60 X
130
517
S.W.A. $3,065.
A8B26
1500 60 X
138
590
S.W.A. $3,185.
A8F66
2000 60 X
179
718
S.W.A. $3,880.
AF655
1500 72 X
102
661
S
$4,182.
AF985
2000 72 X
131
756
S
$4,840.
AFC87
2500 72 X
160
990
S
$5,450.
AFG18
3000 72 X
189
1211
S
$6,100.
LOUISIANA; DV-VW NO LONGER AVAILABLE;
LEFT FOR REFERENCE;
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
3.3.24. VERTICAL STORAGE AGRICULTURAL POLYETHYLENE TANKS: NO LONGER AVAILABLE; LEFT FOR REFERENCE;
PART #
GALLON DIAMETER BY
SUMP STAND. STANDARD
TANK
HEIGHT SIZE
SPEC. 3 SG 1.5
SG 1.9 SG
10790 65
VERT 23" X
42" NONE
3
.
.
$ 110.
10610 110
VERT 29" X
42" NONE
8
$ 156.
10966 200
VERT 31" X
69" NONE
5
$ 255.
10992 300
VERT 42" X
59" NONE
5
$ 303.
10918 550
VERT 56" X
59" NONE
5
$ 373.
27035 625
VERT 47" X
91" NONE
5
$ 407.
26985 850
VERT 47" X
121" NONE
5 $
600. $
674. $ 878.
27040 1225
VERT 64" X
97" NONE
5 $
706. $
820. $1,150.
28986 1525
VERT 64" X
121" NONE
6 $
904. $1,115.
$1,474.
27049 1725
VERT 64" X
138" NONE
5
$1,060. $1,255.
$1,710.
29987 2025
VERT 64" X
159" NONE
5
$1,286. $1,560.
$2.007.
PART#
GALLON
DIAM.BY SUMP
STAND. STANDARD TANK
HEIGHT
SIZE SPEC. 3
SG 1.5
SG 1.9 SG
10947 1100 VERT
84" X 56"
NONE
5
?
?
10871 1300 VERT
84" X 65"
NONE 5
$ 555.
?
?
10872 1600 VERT
84" X 78"
NONE 5
$ 680. $
960. $1,081.
27051 1000 VERT
98" X 46"
NONE
5
$ 560. $ 762.
27052 1400 VERT
96" X 60"
NONE 5
$ 575. $
610. $ 870.
27053 2100 VERT
96" X 86"
NONE 6
$ 980.
$1,238. $1,630.
10939 2500 VERT
96" X 91"
NONE 9
$1,070. $1,355.
$1,705.
27054 2500 VERT
96" X 96"
NONE 9
$1,070. $1,355.
$1,705.
27680 3100 VERT
96" X 118" NONE
19 $1,563.
$1,940. $2,505.
27055 4400 VERT
96" X 158" NONE
19 $2,589.
$3,210. $4,488.
27056 5800
VERT 98" X
202" NONE
19 $4,186.
$4,980. $7,150.
27057 4250 VERT
130" X 92"
NONE 19
$2,560. $3,200.
$6,075.
27058 6200 VERT. 130" X
122" NONE
19 $3,730.
$4,500. $6,070.
27058 9000 VERT. 130" X
172" NONE
19 $
?
$6,815. $9,106.
27060 10500 VERT. 130" X
203" NONE
19 $7,132.
$8,760. $11,940.
CONE BOTTOM STORAGE TANKS:
PART #
GALLON
DIAM.BY SUMP
STAND. STANDARD TANK
HEIGHT SIZE
SPEC. 3 SG 1.5
SG 1.9 SG
10985 150
CONE 42" X
44"
NONE 2
.
.
$ 204.
10986 300
CONE 42" X
69"
NONE
2
$ 297.
27036 625
CONE 47" X 101"
NONE
2
$ 420.
28988 850
CONE 47" X 131"
NONE 2
$ 600. $
678. $ 885.
27041 1225
CONE 64" X 112"
NONE 2
$ 715. $
843. $1,144.
28989 1525
CONE 64" X 137"
NONE 2
$ 915.
$1,127. $1,503.
27050 1725
CONE 64" X 154"
NONE 2
$1,071.
$1,283. $1,754.
28990 2025
CONE 64" X 175"
NONE 2
$1,193.
$1,593. $2,085.
10959 1700
CONE 90" X
87" NONE
13 $ 740.
$ 940. $1,260.
10055 2600
CONE 90" X 122"
NONE 13
$1,292.
$1,639. $2,235.
27577 1000
CONE 96" X
61" NONE
2
?
$ 787.
27678 1400
CONE 96" X
78" NONE
2 $
705.
?
$ 997.
27579 2100
CONE 96" X 101"
NONE 2
$1,206
$1,465. $1,857.
27580 2500
CONE 96" X 111"
NONE 13
$1,276.
$1,557. $2,105.
27681 3100
CONE 96" X 133"
NONE 18
$1,795.
?
$2,891.
27561 4400
CONE 96" X 173"
NONE 18
$2,865.
$3,568. $4,766.
LOUISIANA; DV-VW NO LONGER AVAILABLE; LEFT FOR
REFERENCE;
------------------------------------------------------------------------------------------------------------
3.3.25. TANKS; BOLTED AND WELDED UP TO 100 BBLS; $5,000. LOT; LOUISIANA; JC-KM-VW NO LONGER AVAILABLE; LEFT FOR REFERENCE;
3.3.34. STAINLESS STEEL TANKS AND SPHERE; $*; PHOTO(40K); PHOTOA(40K); LOUISIANA; *-VW NO LONGER AVAILABLE; LEFT FOR REFERENCE;
3.3.35. PLASTIC BARRELS; WITH RE-SEALABLE TOP USING STAINLESS STEEL BAND SYSTEM; 55 GALLON SIZE; WHITE POLY-PROPYLENE; HELD CONTACT CEMENT; ARE CLEANED INSIDE AND OUT; WOULD BE GOOD FOR DRY STORAGE OF PACKAGED ITEMS AND EMERGENCY SUPPLIES; ABOUT 20 AVAILABLE; $40. EACH; 5 OR MORE, $35. EACH; 10 OR MORE $30. EACH; NOTE NOT THE ACTUAL PHOTO OF THIS BARREL TYPE BUT SAME SIZE PHOTO(40K); LOUISIANA; EH-RS-VW NO LONGER AVAILABLE; LEFT FOR REFERENCE; LOOKING FOR ANOTHER USED SOURCE;
3.3.50. FUEL REELS AND HOSES, NEVER USED; REPLACEMENT COST $200K; HAVE 3; $5,800.; PHOTO (40K); LOUISIANA; SK-OC-VW-2222-I-NLNROE NO LONGER AVAILABLE; LEFT FOR REFERENCE;
3.3.54. 1000 GALLON SAFETY STEEL TANKS FOR HAZARDOUS DRILLING MATERIAL SHIPPING; DOT SPECIFIED AND INSPECTED (U.S. DEPARTMENT OF TRANSPORTATION) ; IN PROTECTIVE CAGE FRAME; $7,200. EACH, $7,000. EACH 2 TO 7; $6,800. 8 OR MORE; PHOTO A(40K); LOUISIANA; RA-LF-VW-NENVLR NO LONGER AVAILABLE; LEFT FOR REFERENCE;
3.3.55. STEEL FUEL TANK; OVAL PROFILE ON SIDE ON 3 FULL WIDTH CRADLE TYPE MOUNTS; GOOD PRIMER COATING, TOP COAT OF ALUMINUM PAINT IS DEPLETED; ABOVE GROUND MARINE TYPE FROM A BARGE; DIMENSIONS 24* FEET LONG BY 8* FEET WIDE BY 4.5* FEET HIGH; $2,500.; PHOTO A(40K); PHOTO B(40K); LOUISIANA; JC-VW-NRNVLE NO LONGER AVAILABLE; LEFT FOR REFERENCE;
3.3.57. MINERAL DUST SILO; 8 FEET IN DIAMETER BY 35 FEET HIGH (COUNTING FUNNEL BOTTOM AND STANDOFF FROM GROUND; 4 "I" BEAM LEGS; FILL PIPE, PRESSURE VALVES; SAFETY CAGED LADDER UP THE SIDE TO THE TOP; $4,000.; PHOTO A(40K); MARYLAND; MH-HM-VW-NTNOOO NO LONGER AVAILABLE; LEFT FOR REFERENCE;
3.3.56 LOW TEMPERATURE AIR VOLUME TANK; SERVICE RESTRICTIONS 250 PSI MAXIMUM AT 100 DEGREES FAHRENHEIT; APPROXIMATELY 422 CUBIC FEET VOLUME; APPROXIMATELY 5,736 CUBIC FEET VOLUME AT 200 PSI (13.6 ATMOSPHERES); MINIMUM TEMPERATURE -320 (MINUS 320 F) WAS DESIGNED FOR LIQUID NITROGEN TO MINUS 250 F, LIQUID OXYGEN TO MINUS 225 DEGREES F, LIQUID HELIUM TO MINUS 230 DEGREES F; MINIMUM WALL THICKNESS 0.473 INCH; MANUFACTURED BY UCAR* (UNION CARBIDE*) 1980; MODEL 833, NATIONAL BD 1892; SN TM306D E 1283; PART NUMBER D616477AF; TANK DIMENSIONS: 6.83 FEET (82 INCHES) DIAMETER BY 11.5* FEET (138* INCHES); LONG; HAS TWO 2 INCH PIPES ON ONE END; HAS HEAVY PADEYES TOP AND BOTTOM OF END DOMES; ON "I" BEAM SKIDS, 8 BY 8 BY 8 BY 0.500 INCH 8.5 FEET LONG, 3 BY 4 BY 0.250 INCH ANGLE IRON TO TANK FROM SKIDS, CROSS BRACING BETWEEN SKIDS; GOOD EPOXY COATINGS; MIGHT HAVE TO BE RECERTIFIED FOR ORIGINAL USE BUT VERY GOOD AS LARGE AIR VOLUME TANK OR FLOTATION; GROSS BUOYANCY APPROXIMATELY 26,586 LBS; WEIGHT APPROXIMATELY 7,550 LBS; $2,000.; PHOTO A(20K); PHOTO B(20K); PHOTO F(200K); PHOTO G(200K); PHOTO H(200K); LOUISIANA; FR-VW-NVLNLL 20070820 UPDATED: SHIPPING DIMENSION AND WEIGHT CORRECTION: 1.1 LENGTH: 11.5 FEET LONG (138 INCHES =.5.052 METERS); 1.2 WIDTH: IS 6.83 FEET WIDE (82 INCHES = 6 FEET 10 INCHES = 2.0818 METERS); 1.3 HEIGHT: 7.5 FEET HIGH (90 INCHES = 2.2860 METERS) (IS DIAMETER OF TANK PLUS 8 INCH HIGH SKIDS); 1.4 WEIGHT: 7,550 LBS (3,424.68 KILOGRAMS); WILL FIT IN A SHIPPING CONTAINER; ALSO 1.9.101. NO LONGER AVAILABLE; LEFT FOR REFERENCE;
.3.58. FUEL TANK WITH REQUIRED LEAK SAFETY SYSTEM FOR SMALL SEMI PERMANENT ABOVE GROUND FUEL STORAGE; 2,000 GALLON TOTAL VOLUME SIZE, 1,800 GALLON WORKING CAPACITY; MADE BY LANCASTER TANKS 1995 10; SIZE 12 FEET LONG BY 5.33 FEET IN DIAMETER; MADE OF 16 GAGE STEEL; INCLUDES ELECTRIC PUMP AND GALLON METER; VERY GOOD COATINGS ALL AROUND; GOOD LOOKING, GOOD WORKING; $4,000.; PHOTO A(60K); NEW YORK; OH-FP-VW-LNNVLI NO LONGER AVAILABLE; LEFT FOR REFERENCE;
3.3.59. STEEL FUEL TANK; 2,500* GALLONS; WITH ELECTRIC FUEL PUMP; ROUND PROFILE; ON FULL LENGTH WIDE SKIDS; COULD USE PAINT JOB BUT GOOD METAL; DIMENSIONS 9* FEET LONG BY 7* FEET WIDE (288.6 GALLONS PER FOOT OF LENGTH) BY 7* FEET HIGH; $3,750.; PHOTO A(80K); LOUISIANA; JC-VW-LNLLOE NO LONGER AVAILABLE; LEFT FOR REFERENCE;
3.3.60. STEEL WATER TANK; 3,000 GALLONS; OVAL PROFILE; ON FULL LENGTH WIDE SKIDS*; HAS SPREADER BAR*; COULD USE PAINT JOB BUT GOOD METAL; DIMENSIONS 24* FEET LONG BY 7* FEET WIDE (7 FOOT DIAMETER IS 288.63 GALLONS PER FOOT OF LENGTH; BY 4.5* FEET HIGH; $2,500.; PHOTO A(80K); LOUISIANA; JC-VW-LNLLOE NO LONGER AVAILABLE; LEFT FOR REFERENCE;
3.3.61. HOPPER POTS, HOPPER TANKS; 0.250 (1/4) INCH STEEL WITH REINFORCING AND STEEL "I" BEAM LEGS; HAVE 2 INCH PIPE FITTING OUTLETS IN CENTER OF BOTTOM; SOME HAVE TOPS SPLIT TOPS NOT WATER TIGHT BUT ABOUT 90% OF THE METAL THAT COULD BE WELDED TO MAKE SOLID TOPS: THESE WERE PAINT POTS/TANKS BUT COULD BE USED FOR SAND BLASTING POTS/HOPPERS BY ADDING BOTTOM FEED FITTINGS AND MAKE A WATER TIGHT TOP COVER; STEEL IS IN ABOUT 90% CONDITION, ONLY SURFACE RUST NOT CORROSION; SIZES: 8.33 FEET DIAMETER BY 8 FEET TALL BY 10.25 FEET OVER ALL HEIGHT (WITH LEGS OF "I" BEAM); VOLUME 560 CUBIC FEET (21 CUBIC YARDS); PHOTO A(200K); PHOTO AA(200K); PHOTO AB(200K); PHOTO AC(200K); PHOTO AD(200K); PHOTO AE(200K); HAVE 1; $1,200.; 5 FEET DIAMETER BY 7 FEET TALL BY 10 FEET OVER ALL HEIGHT (WITH LEGS OF "I" BEAM); VOLUME 137 CUBIC FEET (5 CUBIC YARDS); PHOTO B(200K); PHOTO BA(200K); PHOTO BB(200K); HAVE 2; $750. EACH; 4.5 FEET DIAMETER BY 5 FEET TALL BY 5.66 FEET OVER ALL HEIGHT; NO LEGS; M); VOLUME 90 CUBIC FEET (3.3 CUBIC YARDS); PHOTO C(200K); PHOTO CA(200K); PHOTO CB(200K); HAVE 2; $550. EACH; FR-VW-LVNMLV ALSO 1.9.111. NO LONGER AVAILABLE; LEFT FOR REFERENCE;
* * * IMPACT ENTERPRISES HOME & INDEX * * *
* * * EMAIL: IMPACT@IMPACT-ENTERPRISES.COM * * *
